WAC-1 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. two sets of water manifolds included for immediate use.
| Model | WAC-1 |
| Input power | 110 VAC 60 Hz single-phase (1PH) 1460 watts |
| Nominal cooling capacity | 1935 kcal/h |
| Nominal cooling capacity is according to: Inlet chilled fluid temperature: 12°C Outlet chilled fluid temperature: 7°C Inlet cooling air temperature: 30°C Outlet cooling air temperature: 35°C |
|
| Compressor | Make: Panasonic, UL Listed Power: 110VAC 60Hz 1-PH, LRA42, thermally protected Refrigerant: R410A (800g) Number of compressor installed: one |
| Water pump | Make: LX (CMFL2-20-A-W-G-BABE) Power: 110VAC 60Hz 1-PH 370 watts 3.7A 3450 rpm IP55 Flow rate: 528 gallons per hour Max pressure: 10 bar. H(max); 20.5m, H(n): 16m |
| Reservoir volume | 4.5 gallons |
| Cooling fan | Make: Kunli (YWF A2S-300S-5DIIIA05) Power: 110VAC 60Hz 1-PH 155 watts 1.35A 2700rpm 16uF/500V IP44 Flow rate: 70,000 cu ft per hour Number of fan installed: one |
| Temperature accuracy | +/- 2 °C |
| Recommended coolant | Distilled water |
| Water inlet & outlet on chiller | KF40 flange |
| Manifold | Inlet: KF40, outlet: 8mm quick connect with ball valve |
| Unit/shipping weight | 200 Lb / 260 Lb |
| Unit/shipping dimensions | 29 x 17 x 35″ / 36 x 21 x 42″ (DxWxH) |
| Standard package | WAC-1 recirculating chiller*1 pc
Water manifold*2 pc KF40 clamp*2 pc Users manual*1 pc |
| Safety | Over current and compressor thermal protection |
| Working environment | Temperature range of chilled fluid: 5°C – 35°C Temperature difference of chilled fluid between inlet and outlet: 3°C – 8°C. It is better to use the chiller while the ambient temperature at or below 35°C |
| Compatiable induction heaters | High frequency 4kW, 6.6kW Mid frequency 15kW, 25kW Low frequency 15kW |
| CE compliant | Yes |
Related products
-
Chillers
100°C 7L Capacity Compact Heated Recirculator 110V
- ETL tested to UL and CSA standards
- Powerful 1,500 watts heater
- Adjustable pumping speed up to 20 liters per minute
- 2nd generation 7″ TFT touch screen controller
- ANSI standard all stainless steel reservoir
- All steel construction for durability
- Small footprint saves valuable lab space
- Connection tubing included
- Recommended for 2L to 10L distillation systems
SKU: n/a -
Chillers
-30°C 10L Recirculating Chiller with 20L/Min Centrifugal Pump
- ETL tested to UL and CSA standards
- No dry ice or liquid nitrogen needed
- Advanced PID digital temp controller
- Built-in chilling fluid filter protects the recirculating pump and prevent blockage
- All steel construction for durability
- Cost saving as the water consumption is completely eliminated
- Built-in casters for mobility
- Eco-friendly R410A refrigerant
- Insulated tubing included
- Recommended for 5L rotary evaporators
SKU: n/a -
Chillers
-15°C 3L Compact Recirculating Chiller with Centrifugal Pump
- ETL tested to UL and CSA standards
- No dry ice or liquid nitrogen needed
- 360 degree rotating chilling fluid connectors
- ANSI standard all stainless steel reservoir
- All steel construction for durability
- Small footprint saves valuable lab space
- Cost saving as the water consumption is completely eliminated
- Eco-friendly R404A refrigerant
- Insulated tubing included
- Recommended for 2L rotary evaporators
SKU: n/a -
Chillers
200°C 7L SST Compact Desktop Heated Recirculator 220V
- ETL tested to UL and CSA standards
- Powerful 2,800 watts heater
- Adjustable pumping speed up to 20 liters per minute
- 2nd generation 7″ TFT touch screen controller
- Front placed controller keeps all electronics away from the heat and expends lifespan of the controller
- ANSI standard all stainless steel reservoir
- All steel construction for durability
- Small footprint saves valuable lab space
- Comes with 250°C rated, heavy duty, flexible stainless tubing with insulation
SKU: n/a
