-5%

Pfeiffer Vacuum HiScroll 6 Scroll Pump Std, Inlet KF25, 100-240 VAC, P/N PD S10 000


$5,415.00 $5,700.00

Compare

These New Pfeiffer Vacuum HiScroll 6 Scroll Pump Std. comes with full Pfeiffer Warranty. The Pfeiffer HiScroll dry scroll vacuum pump series consists of three dry and hermetically sealed scroll pumps with a nominal pumping speed of 6 – 20 m3/ h. The pumps are especially characterized by their high performance when evacuating against atmosphere due to their unique features. Their powerful IPM synchronous motors achieve an efficiency that is up to 15% higher than that of conventional drives.

Lowest Noise Emission on the Market: The pumps are also characterized by their very compact design and extremely quiet and low-vibration operation. Therefore, they are ideal for use in quiet working environments, for example on mass spectrometers, research & development institutes or leak detection systems.

Intelligent Control: The Pfeiffer HiScroll dry scroll vacuum pumps can be easily connected to other Pfeiffer Vacuum products (such as turbopumps or display and control units) as well as to a higher-level external controller, via RS-485 or ProfiNet. The interface enables RPM regulation, situation-specific control of the fan and monitoring of the pump performance. This helps to minimize wear and noise emissions, and ensures longer maintenance intervals.

High Safety at Lower Costs: The integrated two-stage gas ballast and safety valve ensure process-specific and safe operation. The proven quality of Pfeiffer Vacuum components guarantees the long lifetime. Easy maintenance of the pumps enables short service times and the efficient motor helps to reduce electricity costs.

Category:
Technical Data HiScroll 6, Scroll Pump, Standard
Pumping speed 6.1 m³/h | 3.59 cfm | 101.67 l/min
Final pressure without gas ballast 2 · 10-2 hPa | 1.5 · 10-2 Torr | 2 · 10-2 mbar
Gas ballast flow stage 1 11 l/min
Gas ballast flow stage 2 16 l/min
Leak rate 5 · 10-7 Pa m3/s | 3.75 · 10-6 Torr l/s |
5 · 10-6 mbar l/s
Intake pressure max. 1,100 hPa | 825 Torr | 1,100 mbar
Exhaust pressure, max. 1,500 hPa | 1,125 Torr | 1,500 mbar
Connection flange (in) DN 25 ISO-KF
Connection flange (out) DN 25 ISO-KF
I/O interfaces RS-485
Mains connection 100 — 127 / 200 — 240 V AC (±10 %), 50/60 Hz
Rated current consumption 100 V – 127 V: 4 A
200 V – 240 V: 2 A
Rotation speed 1,000-2,500 rpm | 1,000-2,500 min-1
Protection category IP20
Switch Yes
Ambient temperature 5-40 °C | 41-104 °F | 278-313 K
Temperature: Storage -10-50 °C | 14-122 °F | 263-323 K
Cooling method, standard Air, forced convection
Emission sound pressure level (EN ISO 2151) 48 dB(A)
Weight 19 kg | 41.89 lb
Gas ballast Yes
Operating altitude, max. 2500 m