NEW Leybold D16B Trivac Rotary Vane Dual Stage, Hydrocarbon, Heater, Customized Outlet,120-240VAC 160141V150-1


$6,477.81

Compare

This NEW Leybold D16 D16B Trivac with built in heater is a durable vacuum pump with a superior vapor handling capability. This model also has a customized OUTLET exhaust port for a 13 mm exhaust filter. The Leybold D16 D16B dual stage rotary vane mechanical vacuum pump offers an excellent ultimate pressure of 1×10-4 Torr. This pump is prepared for use with Hydrocarbon Oils. This pump is commonly used for vacuum furnace evacuation, backing turbomolecular pumps, backing diffusion pumps, rotary evaporation, refrigeration system evacuation, epoxy degassing, vacuum sterilization, backing mass spectrometers, freeze drying, vacuum centrifugal applications, vacuum distillation, space research, and other vacuum processes. These Leybold D16 D16B vacuum pumps have a pumping speed displacement of 16.5 CFM. This pump is NEW and comes with a Leybold warranty. Parts, oils, exhaust filers and accesories for this pump are located on this website.

Comes with Attached Heater Below Oil Box:
This Leybold D16B Vacuum Pump contains a heater element below the oil pan. It consists of two integrated heating elements with an output of 75W each and a rated voltage of 120V. The elements are connected in parallel or series depending on the position of the 120/240V selector switch. When reaching temperatures above 150 °C (302 Degrees), both heating circuits will be switched off by the integrated thermo switch. For complete Operating Instructions on the heater and the pump click the yellow label .pdf in the ad below.

Nominal pumping speed m3/h(cfm) 18.9(11.1)
Pumping speed m3/h(cfm) 16.5(9.7)
Ultimate partial pressure without gas ballast mbar 10-4
Torr 0.75×10-4
Utimate total pressure without gas ballast mbar <2×10-3
Torr <1.5×10-3
Ultimate total pressure with gas ballast mbar <5×10-3
Torr <3.8×10-3
Water vapour tolerance mbar 25
Torr 18.8
Water vapour capacity g/h 305
Oil fling, min./max. l 0.45/1.0
Noise level to DIN 45 635
without/with gas ballast
dB (A) 54/56
Admissible ambient temperature °C +12…+40
Weight kg 26
Connections, intake and exhaust side DN 25 KF