Leybold Scrollvac-15 Plus Oil Free Dry Scroll Vacuum Pump with Gas Ballast, 1-phase 100-240 VAC. PN: 141015V10

This new Leybold ScrollVac15 Plus range from Leybold has exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features. The Leybold ScrollVac 15 Plus is the best performing pump in its class. The Leybold ScrollVac 15 Plus is up to 20 times quieter than other pumps. Its intelligent control functions and up to five year service interval offer low cost of ownership, making it the small dry pump of choice for today’s most advanced technologies. NOW with a universal voltage power supply (100-127VAC – 200-240VAC) for performance anywhere in the world. This is the 1 phase motor ScrollVac 15 Plus version with 8.5 CFM.

The Leybold ScrollVac 15 Plus pumps are truly dry vacuum pumps as all the bearings, with their hydrocarbon lubricant, are isolated from the vacuum space. The Leybold ScrollVac 15 Plus is the next generation in completely oil free, dry scroll pumps. No shaft seal to wear allowing much longer intervals between servicing. It offers increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. ScrollVac 15 Plus pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimized pumping performance globally. ScrollVac 15 Plus pumps are designed to be completely field serviceable.

Now with an integral pump controller managing the supply of current to a three-phase electric motor in accordance with operating conditions. The controller monitors power and temperature, and will protect the pump in the event of operation under sustained high load or under fault conditions. The controller provides the user interface. The pump may be operated in Manual mode, using the buttons on the interface panel, with a unique feature to control the speed of the pump in Standby Mode to 70% of full speed or with other buttons to increase or decrease pump speed to save wear and tear on tip seals and bearing service life; or a Remote Mode, via serial communications; or a digital and analogue process control (parallel) mode, via the 15-way D-type logic interface connector.

To pump high vapor loads, gas ballast can be delivered into the pump to prevent condensation of the vapor carried by the pumped gases. The logic interface has been designed to support both serial control, parallel control and monitoring, operating through one connector. For serial control either RS232 or RS485 can be selected.