Environment, Health and Safety Manual – Chapter 01.09: EHS Management System – Self-Inspection Checklists
Title
Environment, Health and Safety Manual – Chapter 01.09: EHS Management System – Self-Inspection Checklists
Purpose
Maintaining a safe and healthful environment is the responsibility of all employees. To augment the inspection efforts of environment, health and safety committees and the Environment, Health and Safety Office, each work unit is required to perform a self-inspection annually.
Use of Inspection Checklists
Checklists have been prepared to assist WUHSLs and other personnel in conducting inspections of their workplaces. Although many of the items on the checklists may seem trite, the fact remains that if these simple rules had been observed by all UNC-CH employees, many accidents and workers’ compensation claims would be avoided each year.
The checklists are not all-inclusive, but are intended to guide the inspector in assessing major safety areas. Be sure to list deficiencies that are found that are not included on the checklists.
Correction of Deficiencies
Upon receipt of self-inspection reports, the Environment, Health and Safety Office staff will review them to determine if any follow up is needed. Any serious safety problems should be reported to the Environment, Health and Safety Office for immediate response and evaluation.
Assistance
If you have any questions regarding the checklists or findings, call the Environment, Health and Safety Office for assistance at 919-962-5507.
Checklists
- Office Environment (see attached file)
- Laboratory Environment (see attached file)
- Clinic Environment (see attached file)
- Industrial, Maintenance and Construction Environment (see attached file)
- Support Services Environment (see attached file)
Contact Information
Policy Contact
Environment, Health and Safety
1120 Estes Drive
Campus Box #1650
Chapel Hill, NC 27599-1650
Phone: 919-962-5507
Back to Chapter 01.08 – Workplace Inspections
Proceed to Chapter 01.10 – Training Requirements