EDWARDSAPG100-XM NW16 Vacuum GaugeWide Range GaugePanning GaugeAutomatic Vacuum Gauge
Applications:The Wide Range Gauge (WRG) series provides single interface pressure measurements at pressures from atmospheric to 10-9 mbar with a linear output. It is a compact solution that requires half the space and connecting hardware, an important advantage for many applications.The WRG has a number of novel features including a new bleeder, push-button calibration, set-point control and comprehensive diagnostics.The WRG is a cost-effective solution for vacuum management, and can be used in conjunction with Edwards controllers or integrated directly into system controls. system control.
Compare
| Pressure range | Atmospheric pressure to 10-9 mbar/Torr |
| Accuracy* | Typically 15% of earth <100 mbar and 30% of earth <10-3 mbar |
| Maximum overpressure | 6 bar absolute (87 psia) |
| Power supply | +14.5 to +36V DC |
| Power consumption | 2W (max) |
| Output signal | 1.8 to 10.2V DC |
| Adjustment | Atmosphere and Setpoint |
| Setpoint | Open collector transistor |
| Maximum Voltage | 40y DC |
| Maximum Voltage | 100 Max. |
| Working | +5 to +60 oC |
| Storage of materials exposed to vacuum | 0 to +70 0C |
| Weight | Stainless steel (AISI304, 316/321/347), Viton, soda lime glass, tungsten, traces of nickel and nickel |
| Internal volume | 26 cm3 |
| External Interface Connector | 0.8 kg |
| Interface cable | 8-way FCC68/RJ45 socket active vacuum gauge cable scope of use EN61326 industrial locations, category B emissions |
| Electromagnetic compatibility | IP40 |
| Chassis Rating | Pin assignment |
| 1. Power supply positive | 5. Signal sharing 6. Setpoint outputs |
| 2.Power supply common | 7. Atmospheric pressure calibration |
| 3.Pressure gauge output | 8. Not connected |
| 4.Pressure gauge marking | Atmospheric pressure to 10-9 mbar/Torr |
Any vacuum system that requires pressure measurement over a wide range. The WEG with AGD represents a very simple and extremely cost-effective means to achieve this.
The linear output and balancing make the WRG an attractive option for industrial 0EMs where vacuum gauges may be integrated directly into the process controller.
The WEG is suitable for use in a wide range of y and UV applications. However, if the process spends a lot of time between 5×10-4 and 5×10-3 mbar, Edwards recommends the use of standalone APG100 Pirani gauges and AIM Penning gauges, as this will improve the gauge’s availability in the application. Functional Advantages.
Microprocessor signal processing allows seamless switching between Pirani and magnetron outputs as well as linear outputs (recorded pressure scale).
D-Type includes cable strain relief and enhanced dust protection – IP44
Low magnetic field version (SL) for sensitive applications such as mass spectrometry and electron microscopy
Easily programmable setpoints cover the entire measuring range
Highly reliable discharge using magnetron technology, even in high vacuum or relatively contaminated environments, for automatic vacuum setting of the Pirani gauge element
Single push-button atmosphere setting
Extended service intervals and gauge life due to reduced HT voltage after ignition and low discharge current Extremely compact construction with recessed electrical connectors
Easy to service; both Pirani and magnetron elements can be replaced individually
Comprehensive failure mode diagnostics
Related products
-
Edwards Vacuum
Edwards T-STATION 85H turbo molecular pump station molecular pump trolley XDD1 TS85W2001
Edwards VacuumEdwards T-STATION 85H turbo molecular pump station molecular pump trolley XDD1 TS85W2001
The T-station85 is a compact, low-cost, removable turbomolecular pump trolley system that provides pumping speeds from 47 1s-1 to 84 1s-1 by seamlessly and systematically integrating the NEXT85H, a dry diaphragm or wet oil-sealed rotary vane pump, and an easy-to-use controller. The T-station85 comes with its own integrated controller for the molecular pump and vacuum gauge, enabling a single button start/stop system. If a vacuum gauge is fitted, the ability to control a gauge, the system breakthrough solenoid valve and delay the start of the turbomolecular pump until a certain point in time or until the system vacuum matches the gauge reading makes the T-station 85 ideal for general laboratory needs.
SKU: n/a -
Edwards Vacuum, RV Series Pumps PFPE, RV3 to RV12
EDWARDS Eduard RV12 Vacuum Pump RV8 Mechanical Pump RV5 Oil Pump Laboratory Industrial Pumping Vacuum Pumps
Edwards Vacuum, RV Series Pumps PFPE, RV3 to RV12EDWARDS Eduard RV12 Vacuum Pump RV8 Mechanical Pump RV5 Oil Pump Laboratory Industrial Pumping Vacuum Pumps
Edwards vacuum pump is a kind of vacuum equipment widely used in semiconductor, optoelectronics, electronics, medical equipment and other fields. It is produced by the American Edwards Company, hence the name Edwards vacuum pump. Now, it has become one of the most popular vacuum pumps in the world. This article will introduce the principle, characteristics, application and maintenance of Edwards vacuum pump. Principle Edwards vacuum pump is a kind of vacuum pump working according to the molecular impact adsorption principle. It is composed of a rotating rotor and a fixed looking shell. There are a series of different sizes of spiral grooves inside the rotor, when the rotor rotates, the spiral grooves will bring the gas to the inside of the housing, and then through the molecular impact adsorption principle, the gas will be absorbed into the inner wall of the housing, and finally realize the generation of vacuum.
Features 1.High efficiency: Edwards vacuum pump adopts advanced molecular impact adsorption principle, which can realize high vacuum generation in a short time, and improve the production efficiency.
And improve the production efficiency.
2. High reliability: Edwards vacuum pump adopts precise technology and high quality materials, which can ensure its long-term stable work. 3. Easy to use: Edwards vacuum pump has the characteristics of simple structure and convenient operation, which is very suitable for wide application in industrial production. 4. Low noise: The operation process of Edwards vacuum pump is very quiet, which will not cause noise pollution to the surroundings. 5.
APPLICATIONS
Edwards vacuum pumps are widely used in the following fields by
5. Semiconductor manufacturing: Edwards vacuum pumps are used in the semiconductor manufacturing process to help prevent gas and impurity contamination and to ensure the quality of semiconductor devices.
6. Optoelectronics industry: Edwards vacuum pumps are also widely used in optical coating, optical instruments, laser equipment and other aspects.
7. Medical equipment: Edwards vacuum pumps are also used in medical equipment, such as magnetic resonance imaging (MRI) equipment. 8. Laboratory: Edwards vacuum pumps are also suitable for vacuum equipment in scientific research laboratories, to help realize the vacuum environment required by a variety of laboratories, and maintenance. 9.
In order to ensure that Edwardian vacuum pumps work stably for a long time, it is necessary to carry out the necessary maintenance. Specific maintenance matters are as follows 9. regular cleaning: regular cleaning will help to remove the adsorption of gas and impurities inside the casing. 10. replace the rotary shaft seal: if the Edwards vacuum pump fails to achieve the expected results, it may be due to the failure of the seal, you need to replace the rotary shaft seal in a timely manner. 11. keep the casing dry.
11. Keep the casing dry: the inside of the volume casing of the Edwards vacuum pump should be kept dry to avoid unnecessary damage such as oxidation. Conclusion Edwards vacuum pump is a powerful and reliable vacuum equipment. It has the advantages of high efficiency, low noise, easy to use, etc. It is widely used in semiconductor, optoelectronics, medical equipment and other fields. In order to ensure its long-term stable work, it is very important to regularly clean, replace the rotary shaft seal, keep the volume shell dry and other maintenance work.SKU: n/a -
Edwards Vacuum
EDWARD EDWARD VACUUM PUMP OILLESS DRY SCREW PUMP 6I ELECTRIC PRELIMINARY PUMP SCANNING
Edwards VacuumEDWARD EDWARD VACUUM PUMP OILLESS DRY SCREW PUMP 6I ELECTRIC PRELIMINARY PUMP SCANNING
The Nerds pump improves on the traditional XDS pump by increasing pumping speed and reducing ultimate pressure, power consumption and noise. nXDs6i is the next generation of completely dry scroll pumps and replaces the XDS5. The gas ballast allows for the pumping of condensable vapors including water, solvents, dilute acids, and bases. nXDs6i is the next generation of completely dry scroll pumps and replaces the XDS5. nXDS offers more performance, higher pumping speeds, lower ultimate pressures, lower power consumption, and less noise than the traditional XDS family.
SKU: n/a
