Edwards RV5 Bipolar Selector Vane Vacuum Pumps
RV5 Edwards Vacuum Pump Features and Benefits 48 DB(a),* minimizes intrusive frequencies. Dual mode. For high throughput and high vacuum applications. Easy-to-use air bladder. Quick-acting inlet valve for system protection. High torque electric starter relay, dual voltage/dual frequency motor. Efficient high pressure lubrication. Clip-in viewing window. Oil seals with printed gaskets for efficient shaft sealing. High-tech polymer blades with large diameter and easy-to-clean oil circuit. With consistent inherent quality, cast construction.
Compare
Key Features
48 dB(A) to minimize intrusive frequencies.
.” Dual mode. For high throughput and high vacuum applications.
.D Quick-acting inlet valve provides system protection.
. Easy-to-use air bladder.
.” High torque, dual voltage/dual frequency motor , electric start relay.
. Force oil seals with printed gaskets, high shaft sealing efficiency .
.2 High-tech polymer blades with large diameter and easy-to-clean oil circuit.
Technical Parameters
| Speed 50Hz/60 HZ | 5.1 m3h-1/3.0 ft3min-1
6.2 m3h-1/3.7 ft3min-1 |
| Limit pressure | 2.0 x10-3 mbar/1.5 x 10-3 Torr |
| Maximum inlet pressure for water vapor | 50 mbar/38 Torr |
| Maximum permissible outlet pressure | 0.2 bar gauge pressure/2.8 psig |
| Motor power 50/60Hz | 450/550W |
| Weight (without oil) | 25 kg/55 lb |
| Inlet flange | NW25 |
| Noise level | 48 dB(A) at 50 Hz |
| Power connector (1 phase) | IEC EN60320 C13 |
| passenger volume 50/60Hz | 5.8 m3h-1/3.4 ft3min-1
7.0 m3h-1/4.1 ft3min-1 |
| Operating temperature range | 12-40°C |
| Minimum/Maximum Oil Volume | 0.42/0.7 liters |
| Exhaust port flange | NW25 |
| Nominal speed 50/60Hz | 1500/1800rpm |
Related products
-
Edwards Vacuum
Edwards APG100-XLCNW16 Vacuum GaugeWide Range
GaugePanning GaugeAutomatic Vacuum Gauge
Applications:The Wide Range Gauge (WRG) series provides single interface pressure measurements at pressures from atmospheric to 10-9 mbar with a linear output. It is a compact solution that requires half the space and connecting hardware, an important advantage for many applications.The WRG has a number of novel features including a new bleeder, push-button calibration, set-point control and comprehensive diagnostics.The WRG is a cost-effective solution for vacuum management, and can be used in conjunction with Edwards controllers or integrated directly into system controls. system control.SKU: n/a -
Edwards Vacuum, RV Series Pumps PFPE, RV3 to RV12
EDWARDS Eduard RV12 Vacuum Pump RV8 Mechanical Pump RV5 Oil Pump Laboratory Industrial Pumping Vacuum Pumps
Edwards Vacuum, RV Series Pumps PFPE, RV3 to RV12EDWARDS Eduard RV12 Vacuum Pump RV8 Mechanical Pump RV5 Oil Pump Laboratory Industrial Pumping Vacuum Pumps
Edwards vacuum pump is a kind of vacuum equipment widely used in semiconductor, optoelectronics, electronics, medical equipment and other fields. It is produced by the American Edwards Company, hence the name Edwards vacuum pump. Now, it has become one of the most popular vacuum pumps in the world. This article will introduce the principle, characteristics, application and maintenance of Edwards vacuum pump. Principle Edwards vacuum pump is a kind of vacuum pump working according to the molecular impact adsorption principle. It is composed of a rotating rotor and a fixed looking shell. There are a series of different sizes of spiral grooves inside the rotor, when the rotor rotates, the spiral grooves will bring the gas to the inside of the housing, and then through the molecular impact adsorption principle, the gas will be absorbed into the inner wall of the housing, and finally realize the generation of vacuum.
Features 1.High efficiency: Edwards vacuum pump adopts advanced molecular impact adsorption principle, which can realize high vacuum generation in a short time, and improve the production efficiency.
And improve the production efficiency.
2. High reliability: Edwards vacuum pump adopts precise technology and high quality materials, which can ensure its long-term stable work. 3. Easy to use: Edwards vacuum pump has the characteristics of simple structure and convenient operation, which is very suitable for wide application in industrial production. 4. Low noise: The operation process of Edwards vacuum pump is very quiet, which will not cause noise pollution to the surroundings. 5.
APPLICATIONS
Edwards vacuum pumps are widely used in the following fields by
5. Semiconductor manufacturing: Edwards vacuum pumps are used in the semiconductor manufacturing process to help prevent gas and impurity contamination and to ensure the quality of semiconductor devices.
6. Optoelectronics industry: Edwards vacuum pumps are also widely used in optical coating, optical instruments, laser equipment and other aspects.
7. Medical equipment: Edwards vacuum pumps are also used in medical equipment, such as magnetic resonance imaging (MRI) equipment. 8. Laboratory: Edwards vacuum pumps are also suitable for vacuum equipment in scientific research laboratories, to help realize the vacuum environment required by a variety of laboratories, and maintenance. 9.
In order to ensure that Edwardian vacuum pumps work stably for a long time, it is necessary to carry out the necessary maintenance. Specific maintenance matters are as follows 9. regular cleaning: regular cleaning will help to remove the adsorption of gas and impurities inside the casing. 10. replace the rotary shaft seal: if the Edwards vacuum pump fails to achieve the expected results, it may be due to the failure of the seal, you need to replace the rotary shaft seal in a timely manner. 11. keep the casing dry.
11. Keep the casing dry: the inside of the volume casing of the Edwards vacuum pump should be kept dry to avoid unnecessary damage such as oxidation. Conclusion Edwards vacuum pump is a powerful and reliable vacuum equipment. It has the advantages of high efficiency, low noise, easy to use, etc. It is widely used in semiconductor, optoelectronics, medical equipment and other fields. In order to ensure its long-term stable work, it is very important to regularly clean, replace the rotary shaft seal, keep the volume shell dry and other maintenance work.SKU: n/a -
Edwards Vacuum, RV Series Pumps, RV3 to RV12
Edwards RV12 Rotary Vane Dual Stage Mechanical Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, A65501906
-9%
Edwards Vacuum, RV Series Pumps, RV3 to RV12Edwards RV12 Rotary Vane Dual Stage Mechanical Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, A65501906
- High reliability – generous lubrication of moving parts.
- Safe process and systems – fast acting inlet valve for best in class anti-suck back protection.
- Configured to meet your vacuum needs – mode selector and two position gas ballast.
- No unplanned downtime – designed for easy maintenance.
- Better work environment – quiet running and intrusive frequencies minimized.
- Two position gas ballast allows either 60 g/h or a class leading 220 g/h (290 g/h on RV12) of water vapour to be handled.
- Universal motor to cover the widest possible voltage and frequency range from a single variant.
- Smooth controlled inlet valve opening by oil pressure to eliminate pressure surges.
- Rapid closing inlet valve within 0.4 seconds of pump stopping.
SKU: n/a -
Edwards Vacuum
EDWARD EDWARD VACUUM PUMPS Oilless Dry Scroll Pump 15I Electric Prestage Pump Scanning
Edwards VacuumEDWARD EDWARD VACUUM PUMPS Oilless Dry Scroll Pump 15I Electric Prestage Pump Scanning
Product Description The nXDS pump improves on the traditional XDS pump by increasing pumping speed and reducing ultimate pressure, power consumption and noise. nXDS pumps are available in a variety of configurations, such as a wide range of pumps and a wide range of applications. Gas ballast allows for the pumping of condensable vapors including water, solvents, dilute acids and bases. nXDS pumps also incorporate the latest end seal technology, which significantly extends the interval between end seal replacements. nXDS pumps are available in a wide range of sizes and sizes. An integrated frequency converter drive with automatic voltage input sensing provides overall optimized pumping performance, and the nXDS pump is fully field serviceable. nXDS6i is the next generation of completely oil-free thousand-speed vortex pumps and replaces the XDS5. nXDS offers more performance, higher pumping speeds, lower ultimate pressures, lower power consumption, and less sound than the traditional XDS. nXDS6i is the next generation of oil-free vortex pumps. Gas ballast allows for the pumping of condensable vapors including water, solvents, dilute acids and bases. nXDS also incorporates the latest end seal technology, which significantly extends the interval between end seal replacements. nXDS also incorporates the newest end seal technology, which significantly extends the interval between end seal replacements. An integrated inverter drive with automatic voltage input sensing provides overall optimized pumping performance. nXDS is fully field-viable.
SKU: n/a
