-18%

Edwards nEXT85D Turbomolecular High Vacuum Pump, 80 watts, CF63 CF 4.5 in. Inlet, 84 l/s. PN: B8G210C01


●Class leading performance in a reduced footprint
●Enhanced customer choice with standard and compression focused variants
●Increased operating envelope maximized by Edwards patented direct impeller temperature measurement technology
●Additional flexibility from customised interstage and backing port position selection
●The bearing and oil cartridge in the nEXT85 are fully end user serviceable
●CMSD enabled low vibration levels
●Intelligent pumps with included micro USB port and nST sofware allowing pump monitoring, control and configuration

$6,065.82 $7,414.29

Compare

The NEW nEXT85D pumps 84 liters per second (l/s) and has an ultimate pressure of 5×10-9 Torr and has a CF63 CF 4.5 in. inlet and ISO KF-16 exhaust fore line flange. The nEXT85D turbomolecular pump builds upon the success of the EXT75DX to deliver a pump with significantly improved performance in a smaller package. The rotor has been totally re-designed to optimize pump performance and achieve both higher speeds and higher compression while maintaining high levels of reliability. In addition to enhanced performance the nEXT85D benefits from the same service and operational functionalities from the larger nEXT range, including field serviceability and in-built intelligence, for a truly class leading product.

The nEXT85D pump consists of a turbomolecular pump with a permanently attached motor controller containing drive electronics. The motor controller controls the electrical supply to the pump. It allows manual adjustment of standby speed, all other controls can only be operated through the logic interface. To operate the nEXT85D pump, connect it to the customer control equipment and power supply or, alternatively, use the Edwards TIC or TAG Turbo Instrument Controllers for panel controls and pressure indications, sold separately.

Category:
Parameter nEXT85D nEXT85H nEXT85D nEXT85H nEXT85D nEXT85H nEXT85D nEXT85H
Mass 3.0 Kg 3.0 Kg 4.4 Kg 4.4 Kg 3.2 Kg 3.2 Kg 2.9 Kg 2.9 Kg
Main inlet port ISO63 ISO63 CF63 CF63 ISo100 ISo100 NW40 NW40
Exhaust port NW16 NW16 NW16 NW16 NW16 NW16 NW16 NW16
Vent port 1/8 inch BSP 1/8 inch BSP 1/8 inch BSP 1/8 inch BSP 1/8 inch BSP 1/8 inch BSP 1/8 inch BSP 1/8 inch BSP
Main inlet pumping speed:
N2(ls-1) 84 84 84 84 86 86 47 47
He(ls-1) 78 78 78 78 80 78 61 61
H2(ls1) 60 54 60 54 60 54 49 49
Ar(ls-1) 80 80 80 80 84 84 44 44
Peak compression ratio from the backing port to the main inlet port:
Nz >10 11 >10 11 >10 11 >10 11 >10 11 >10 11 >10 11 >10 11
He 8 x 10 6 2 x 10 7 8 x 10 6 2 x 10 7 8 x 10 6 2 x 10 7 8 x 10 6 2 x 10 7
H2 2 x 10 5 2 x 10 5 2 x 10 5 2 x 10 5 2 x 10 5 2 x 10 5 2 x 10 5 2 x 10 5
Ar >10 11 >10 11 >10 11 >10 11 >10 11 >10 11 >10 11 >10 11
Ultimate pressure (mbar) 5 x 10 -9 5 x 10 -9 5 x 10 -10 5 x 10 -10 5 x 10 -9 5 x 10 -9 5 x 10 -9 5 x 10 -9