-6%

AII GPR-1100 Oxygen Analyzer

Measuring Ranges:
- 0 to 10, 0 to 100, 0 to 1,000ppm & 0 to 1%
- 0 to 25% for calibration only
XLT sensor for CO2 backgrounds
General purpose or intrinsically safe (ATEX) models
24 to 32 months sensor life span (in normal use)
Internal pump option
0 to 1V output
Stainless steel wetted materials
XLT sensor options for CO2 backgrounds
Lightweight: 2.5Kgs

$3,009.00 – $3,825.00

Sensor

Power

Options

Clear

The AII GPR-1100 Oxygen Analyzer is an industry standard portable analyzer for trace oxygen measurements down to 0.1 ppm.
Supplied with stainless steel wetted materials, the instrument is also equipped with quick connect fittings to trap the sample in the analyzer and extend the oxygen sensor service life by avoiding air diffusing into the sensor.

SKU: N/A Category: Oxygen Analyzers

Measurement range	0-10, 0-100, 0-1000 ppm, 0-1%, 0-25%
Accuracy	< 2% of selected range at constant conditions
Response time	T90 < 10 seconds
Recovery time	60 sec in air to < 10 ppm in < 1 hour on N2 purge
Sensitivity (LDL)	0.05 ppm
Linearity	< 1% of scale
Sensor model	GPR-12-333
Sensor model	XLT-12-333 for gas mixture with > 0.5% CO2
Sensor life at 25ºC (77°F) and 1 atm	24 months in < 1000 ppm O2
Calibration interval	30 days
Inlet pressure	0.34–2 barg (5-30 psig) with atmospheric vent
Flow rate	0.5-1.0 Nl/m (1-2 SCFH)
Gas connections	1/8″ NPT male quick connect
Wetted parts	Stainless steel
Display	Graphical LCD 7 x 3.5cm (2.75 x 1.375”)
Resolution	0.01 ppm
Enclosure	Painted aluminum NEMA 4X, 10.1 x 22.9 x 7.6cm (4 x 9 x 3”)
Enclosure	3.64Kg (8lbs)
Compensation	Barometric pressure and temperature
Signal output	0-1V
LED indicators	LOW BATT (72 hr. warning); CHARGE mode
Operating temperature	5°C to 45°C (41°F to 113°F) (GPR sensor), -10° to 45°C (14°F to 113°F) (XLT sensor)
Power	Rechargeable battery (lead acid)
Battery life	Up to 30 days on a single charge (40 hours with pump running)
Area classification	ATEX: Ex ib IIB T4 Tamb +5°C to +45°C

Michell Instruments XTP601 Oxygen Analyzer