-28%

AII 3000 Series Oxygen Analyzer

Name: AII 3000 Series Oxygen Analyzer
SKU: 7897
Availability: InStock

$434.00 – $765.00

Sensor and Alarms

Clear

The AII 3000 series oxygen analyzer is an ergonomic handheld device designed to measure oxygen deficiency in confined spaces. The analyzer is also used to check oxygen levels in welding applications or for the safety checks of breathing air for diving.
The AII 3000 uses an electrochemical galvanic fuel cell-type oxygen sensor of the type that is extensively used to measure oxygen concentrations from 0% to 100% in gas streams. A battery-powered microprocessor converts the sensor’s signal output representing the partial pressure of oxygen in the gas stream being analyzed. The resulting oxygen reading is displayed by a large easy-to-read backlit liquid crystal display (LCD) that has a resolution of 0.1% oxygen. The sensor also has an absolute zero reading that displays 0.00 oxygen when no oxygen is present. The microprocessor is controlled from a keypad and provides features like system diagnostics, warning indicators, controls and an alarm capability for continuous monitoring that enhance both safety and effectiveness.
The analyzer can be positioned on a tabletop or pole and can be readily portable from one location to another. Tripod wire stand and V-mount dovetail attachments are mounted on the back of the device.

SKU: N/A Category: Oxygen Analyzers

Measurement range	0-100% oxygen
Accuracy	< ±2% of FS range under constant conditions
Response time	T90 < 10 seconds
Sensitivity (LDL)	0.50%
Linearity	±1% under constant conditions
Sensor model	AII-11-60 (remote sensor) AII-11-60-HC
Sensor life at 25°C (77°F) and 1 atmosphere	60 months in air
Calibration interval	Prior to use and after 8 hours operation
Inlet pressure	Ambient or 0.34-2 barg (5-30 psig) for flow through connector
Flow rate (constant)	0.2-10 Nl/min (0.4-20 SCFH)
Gas connections	1×16 mm thread 1/4” tube for remote sensors See accessories for additional connectors
Display	3½ digit backlit LCD 7 x 3.5cm (2.75 x 1.375”); resolution 0.1
Dimensions	9.1 x 14.9 x4 cm (3.6 x 5.9 x1.6”)
Weight	280g (10oz)
Compensation	Temperature compensated
Alarms	User adjustable HI and LO alarms (AII-3000 M and MHC only)
Storage temperature	-20°C to +60°C (-4°F to 140°F) on intermittent basis
Operating temperature	5 to 45°C (41°F to 113°F)
Power	2 AA alkaline batteries
Battery Life	Up to 1200 hrs
Humidity	Non-condensing 0-95% RH
Warm up time	None
Approvals	ISO 9001:2000, MDD 93/42/Annex II, ISO 13485:2003

AII GPR-3500 MO Oxygen Analyzer