-75°C 10L Recirculating Chiller with 30L/Min Centrifugal Pump

Add to wishlist
Compare
  • ETL tested to UL and CSA standards
  • No dry ice or liquid nitrogen needed
  • Advanced PID digital temp controller
  • Built-in chilling fluid filter protects the recirculating pump and prevent blockage
  • All steel construction for durability
  • Cost saving as the water consumption is completely eliminated
  • Built-in casters for mobility
  • Plug and play, no assembly required
  • Recommended for 20L jacketed reactors (jacket volume 6L)

$19,990.00

Compare
Download PDF

The re-designed C80-10 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.
C80-10 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

IMPORTANT! -75C ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO JACKETED REACTORS ATTACHED).

Category:
 Model C80-10
 Working temperature range -60°C to -75°C (unit is not designed to run at temperature hotter than -60°C)
 Electrical requirements 220V 60Hz 1-PH 22A, 4750 watts
 Compressor Make: KK
Power: 208-230V 60Hz 1-Phase
Number of compressor: two
Refrigerant: R404A (2680g) and R23 (710g)
 Cooling capacity (assuming
working environment is
25°C or 77°F)		 @ -40°C:       2000W
@ -50°C:       1500W
@ -60°C:       1000W
@ -75°C:       280W
@ -78°C:       180W
 Reservoir Capacity: 10 liters or 2.6 gallons
Dimensions: 17.5 x 7 x 8.5 inches (LxWxH)
Material: Type 304 stainless steel
Chilling fluid connection: 1/2″ NPT
Drain port: 3/8″ barb
 Recirculating pump Pump type: Centrifugal
Model: 25PLBR30-10
Pumping speed: 8 gallon/min or 30L/min
Power: 280W
Pressure: 1 bar
 Radiator Fan motor
Make: Boyoung
Model: YWF 4E-350
Power: 220V 60Hz 0.8A 180W
Rotation speed: 1600rpm
Flow rate: 2500 m2/hour
Cleaning
Clean radiator fins with a fin comb every three months
 Working environment requirements Temperature: between 5°C to 35°C
Humidity: < 70%
 Temperature controller Digital microprocessor PID controlled
Accuracy: +/- 2°C
Display unit: Celsius °C
 Temperatures sensor type Pt100
 Housing Powder coated type 42 stainless steel
 Built-in swivel casters Four
Standard package C80 recirculating chiller*1 pc
3/8″ insulated chilling fluid tubing*11 ft
1/2″ NPT chilling fluid on/off valve*2 pc
1/2″ NPT to 3/8″ barb adapter*2 pc
1/2″ NPT connector*2 pc
PTFE sealing tape*1 pc
Users manual*1 pc
 Safety Compressor over-heat protection
Short circuit and ground protection
Over-current protection
Over-voltage protection
Over-heat protection
 Unit/shipping weight 515 lbs / 615 lbs
 Unit/shipping dimensions 38.5 x 25 x 52 inches / 44 x 30 x 64 inches (DxWxH)
 Compliance UL 61010-1 :2012 Ed.3+R:29Apr2016
CSA C22.2#61010-1 :2012 Ed.3

Related products