SST -20°C to 99°C 7L Compact Recirculating Chiller

Add to wishlist
Compare
  • ETL tested to UL and CSA standards
  • All stainless steel finish
  • Powerful 2,000 watts heater
  • Adjustable pumping speed up to 20 liters per minute
  • 2nd generation 7″ TFT touch screen controller
  • No dry ice or liquid nitrogen needed
  • ANSI standard all stainless steel reservoir
  • All steel construction for durability
  • Eco-friendly R404A refrigerant
  • Small footprint saves valuable lab space
  • Cost saving as the water consumption is completely eliminated
  • Connection tubing included
  • Recommended for 2L rotary evaporators and 2L-10L distillation systems

$2,790.00

Compare
Download PDF

C20 series recirculating chillers are the true thermostatic control laboratory chiller, this closed laboratory chiller is ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.
C20 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while  2nd generation controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

Attention! Do NOT use Chill-50 heat transfer fluid with this unit.

IMPORTANT!

20C ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).

 

SKU: N/A Category:
 Model C20-7sst
 Temperature range -20°C to +99°C (No load)
 Electrical requirements 110V 60Hz or 220V 60Hz 1-Phase 2,500 watts
 Compressor Make: SECOP (formerly known as Danfoss), Germany
Number of compressor: one
Refrigerant: R404A (190g)
Cooling capacity:
420W at 20°C
410W at 10°C
390W at 0°C
350W at -10°C
300W at -20°C
 Heating capacity 2,000 watts
 Recirculating pump Pumping speed: 20 liters per minute, adjustable
Maximum head: 16 feet or 5 meters
 Reservoir Dimensions: 8 x 10 x 5.5″ (WxDxH)
Material: Type 304 stainless steel, polished
Capacity: 7.3 liters or 1.9 gallons
Chilling fluid connection: 3/8″ hose barb x 2
Chilling fluid drain port: 3/8″ hose barb with on/off valve
 Temperature controller Type: Digital microprocessor PID controlled
Display: 7″ TFT touch screen
Display unit: Degree Celsius °C
Temperature step: 0.1°C
Temperature accuracy: +/- 2°C
Temperature range: -20°C to 99°C
 Recommended coolant For 50°F/10°C or higher: distilled water
Between 50°F/10°C and -4°F/-20°C:
50% ethylene glycol + 50% distilled water
 Working environment -15°C/5°F to 25°C/77°F, at <66% humidity
 Built-in swivel casters No
 Unit/shipping dimensions  12 x 15.5 x 26″ / 15 x 20 x 30″ (WxDxH)
 Unit/shipping weight 68 Lbs / 100 Lbs
Standard package C20-7 -20°C 7L recirculating chiller*1 pc

3/8″ insulated chilling fluid tubing*5 ft x 2

1/2″ NPT to 3/8″ hose barb drain port adapter*1 pc

User’s manual*1 pc
 Safety Compressor over-temp protection
Compressor power surge delay protection
Short circuit and ground protection
Over-current protection
Over-temperature protection
Upper/lower temperature alarm protection
Compressor delay start protection
 Recommended for 2L, 5L or 10L short path distillation systems
2L SolventVap rotary evaporators
 Warranty One year
 Compliance UL 61010-1 :2012 Ed.3+R:29Apr2016
CSA C22.2#61010-1 :2012 Ed.3

Related products