Quality Lab B Semi-Auto Stacking Machine
Compare
Description:
It is suitable for the lamination process of battery cells. The positive and negative electrodes and the separator are laminated in a Z shape. It is a device that can be applied to the lamination process of lithium ion battery pole pieces. The equipment adopts the isolation membrane automatic tension control system, the cylinder drives the diaphragm to move left and right to realize the zigzag lamination, and the cantilever design is easy to operate. Compared with the manual stacking machine, this equipment has the characteristics of high stacking efficiency, good stacking neatness, and a large range of applicable battery sizes. It is an ideal choice for R&D sample production and small batch trial production equipment.
Feature:
1. The adjustment, operation and maintenance of the machine are simple and easy.
2. It can be used in a wide range of laminations.
3. Semi automatic lamination and balance tension control system.
4. Automatic counting and zeroing function.
5. Automatically maintain the last parameter state function after power failure and non use.
6. The whole machine is suitable for a wide range of battery sizes.
7. Use foot switch to control cylinder action.
8. The adjustment, operation and maintenance of the machine are simple and easy.
9. High efficiency with digital timer.
10. Table type, can be placed on the ordinary desktop, exquisite and beautiful appearance.
Specification:
| Laminated accuracy | The neatness is better than ±0.5mm |
| Laminated dimension | Min. L44mm x W44mm(Smaller size needs to be replaced) Max. L200mm x W150mm(Tab is on the long side) |
| Laminated thickness | Max.12mm(The adjustment plate needs to be replaced if it is thicker) |
| Separator roll size | Max.220mm |
| Installation dimension | L512mm x W820mm x H580mm |
| Weight | About 50Kg |
| Power supply | 220V/110VAC |
| Air supply | 0.4～0.6MPa compressed air |
