,

Eduard RV8 Vacuum Pumps


The RV Series oil-sealed rotary vane pumps offer lower operating and maintenance costs than other oil-sealed rotary vane pumps, a design feature that has made them the standard oil-sealed rotary vane in laboratory applications for many years. All pumps are verified by external testing organizations to UL and CSA standards. Edwards has a global network to support applications and services around the world.

Compare

The EdwardsRv pump has become the industry standard for primary pumping science applications. RV pumps are uniquely capable of delivering high throughput or low throughput at high ultimate vacuum. This, together with the advantage of extremely low noise levels, makes it ideal for a wide range of applications, including GCMS and other small bench applications!
The RV series oil-sealed rotary vane pumps offer lower operating and maintenance costs than other oil-sealed rotary vane pumps, a design feature that has made them the standard oil-sealed rotary vane pumps for laboratory applications for many years. With their unique mode selector, the pumps can be used for both high-flow, low vacuum and low-flow, high-vacuum applications; the self-centering mechanism, the non-locating pin design ensures interchangeable parts, high vapor extraction capacity, and a wide variety of pumping options. The self-centering mechanism, the non-locating pin design for parts interchangeability, the high vapor extraction capacity and the wide range of accessories make the RV pumps the most suitable choice for long-term use in laboratory applications. All pumps are tested by external testing organizations and meet UL and CSA standards. Edwards has a global network to support applications and service around the world. Supplied with the product: 1 liter of 19 oil, inlet filter and 0-ring. Fo mblin@ must be purchased separately for PFPERV pumps. Product Features
48 dB(A) to minimize intrusive frequencies
Dual mode. For high throughput and high vacuum applications
Easy-to-use air bladder.
Quick-acting air inlet valves provide system protection, the
High torque, dual voltage/dual frequency motor with electric start relay.
Efficient high-pressure lubrication clip-in viewing window.
High-tech polymer blades, large diameter, easy to clean oil passages
Consistent inherent mass, rod construction

Key Features
48 dB(A) to minimize intrusive frequencies.
. Dual mode. For high throughput and high vacuum applications .
.D snap-action inlet valve provides system protection.
.” Easy-to-use air bladder.
. High torque, dual voltage/dual frequency motor , electric start relay.
Oil seals with printed gaskets, high shaft sealing efficiency.
. High-tech polymer blades with large diameter and easy to clean oil circuit.

Technical Parameters

Speed 50Hz/60 HZ 8 . 5 m 3 h- 1/ 5 ft 3 mi n – 1

1 0 m 3 h- 1/ 5 . 9 ft 3 mi n – 1

Limit pressure 2.0 x10-3 mbar/1.5 x 10-3 Torr
Maximum inlet pressure for water vapor 50 mbar/38 Torr
Maximum permissible outlet pressure 0.2 bar gauge pressure/2.8 psig
Motor power 50/60Hz 450/550W
Weight (without oil) 28kg/61.6 lb
Inlet flange NW25
Noise level 48 dB(A) at 50 Hz
Power connector (1 phase) IEC EN60320 C13
passenger volume 50/60Hz 9.7 m3h- 1/ 5.7 ft3min- 1

11.7 m3h- 1/6.9ft3min- 1

Operating temperature range 12-40°C
Minimum/Maximum Oil Volume 0.42/0.7 liters
Exhaust port flange NW25
Nominal speed 50/60Hz 1500/1800rpm