EDWARD EDWARD VACUUM PUMP OILLESS DRY SCREW PUMP 10I ELECTRIC PRELIMINARY PUMP SCANNING
The nXDs pump improves on the traditional XDS pump by increasing pumping speed and reducing ultimate pressure, power consumption, and noise. Gas ballast allows for the pumping of condensable vapors, including water, solvents, dilute acids and bases.
allow the pumping of condensable vapors, including water, solvents, dilute acids and bases. nXDs6i is the next generation of completely dry volute pumps and replaces the XDS5. nXDS offers greater performance, higher pumping speeds, lower ultimate pressures, lower power consumption, and less noise than the traditional XDS pump.
Compare
Main Features
No lubricants are required in the center vacuum housing, and complete sealing ensures a thoroughly clean and dry vacuum, preventing cross-contamination.
Atmospheric-to-vacuum shaft seals completely isolate the bearings, thus preventing process attack and allowing the bearings to run at lower temperatures for longer periods of time.
. Improved motor and drive efficiency reduces power and operating costs.
Advanced interfaces provide a wide range of conventional, analog and digital controls.
Technical Parameters
| Rated speed | 1800 rpm |
| Volume | 12.7 m3h-1 /7.5 ft3min-1 |
| Peak extraction speed | 11.4 m3h-1 /6.7 ft3min-1 |
| Ultimate vacuum (total pressure) | 0.007 mbar /0.005 Torr |
| Minimum standby speed | 1200 rpm |
| Speed control accuracy | 1% of the total volume |
| Extraction speed at min. rpm | 7.5 |
| Maximum continuous inlet pressure | 200mbar |
| Motor power (1 phase) | 280W |
| Power connector (1 phase) | IEC EN60320 C13 |
| Recommended Fuse | 10A, 250Vac rms |
| Mileage | 25.8 kg / 57 lb |
| Inlet flange | NW25 |
| Noise Level | 52dB(A) |
after-sales service
| ★ The whole process ★ | One-stop repair, maintenance, training services, the establishment of a complete user profile. |
| ★ more money ★ | ① buy extended warranty service, equipment maintenance, you do not need to pay any additional costs (except consumables); ② free value-added services, timely replacement of you usually do not pay attention to the parts reported for repair, to eliminate hidden problems, to ensure that the equipment has been in a good state of use; ③ more favorable hardware upgrades to meet the higher demand for equipment; ④ more favorable purchase of consumables. |
| ★ More timely ★ | After you choose the extended warranty service, the company will be able to prepare the common modular parts in the engineers, engineers can efficiently and timely replacement of faulty modules, shorten the maintenance cycle, so that your production work more smoothly and efficiently, creating higher profits for you. |
| ★ More peace of mind ★ | equipment in the 1-year free warranty period, will no longer enjoy the full warranty service, and the purchase of extended warranty service, you can continue to enjoy the free warranty, we will regularly visit the use of equipment, to provide you with high-quality, perfect equipment warranty service, free of your worries. |
| ★ More convenient ★ | You only need to call PATO vacuum equipment customer service hotline, online customer service will be 24 hours for your dedicated service, all your needs we can instantly meet. |
| ★ Maintenance costs can be controlled ★ | did not buy the extended warranty service, maintenance costs will be charged according to the faulty equipment and fault conditions, the enterprise equipment maintenance costs are not controllable; purchased the extended warranty service, the maintenance costs can be controlled, into a budgetary system of inputs, you can significantly reduce the risk of increased equipment maintenance costs. |
| ★ Professional maintenance services ★ | Let our service team to provide you with more professional support, hand in hand to create a better future! |
Related products
-
Edwards Vacuum, RV Series Pumps, RV3 to RV12
Edwards RV12 Rotary Vane Dual Stage Mechanical Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, A65501906
-9%
Edwards Vacuum, RV Series Pumps, RV3 to RV12Edwards RV12 Rotary Vane Dual Stage Mechanical Vacuum Pump, Single Phase, 115/230 V, 50/60 Hz, A65501906
- High reliability – generous lubrication of moving parts.
- Safe process and systems – fast acting inlet valve for best in class anti-suck back protection.
- Configured to meet your vacuum needs – mode selector and two position gas ballast.
- No unplanned downtime – designed for easy maintenance.
- Better work environment – quiet running and intrusive frequencies minimized.
- Two position gas ballast allows either 60 g/h or a class leading 220 g/h (290 g/h on RV12) of water vapour to be handled.
- Universal motor to cover the widest possible voltage and frequency range from a single variant.
- Smooth controlled inlet valve opening by oil pressure to eliminate pressure surges.
- Rapid closing inlet valve within 0.4 seconds of pump stopping.
SKU: n/a -
Edwards Vacuum, RV Series Pumps PFPE, RV3 to RV12
EDWARDS RV3 vacuum pump bipolar selector vane vacuum pumps
Edwards Vacuum, RV Series Pumps PFPE, RV3 to RV12EDWARDS RV3 vacuum pump bipolar selector vane vacuum pumps
DEWA EDWARDS VACUUM PUMP RV3 Features (1) The vacuum pump has a large pumping speed in a wide pressure range; (2) No need for oil sealing and lubrication in the pump chamber reduces the contamination of oil vapor on the vacuum system; (3) No compression in the vacuum pump chamber, no exhaust valve. The structure is simple, compact, and insensitive to dust and water vapor in the pumped gas; (4) The rotor has good geometric symmetry, so it has little vibration and smooth operation. There are gaps between the rotor and between the rotor and the shell, without lubrication, small friction loss, which can greatly reduce the driving power, so that a higher speed can be realized.
SKU: n/a -
Edwards Vacuum
Edwards T-STATION 85H turbo molecular pump station molecular pump trolley XDD1 TS85W2001
Edwards VacuumEdwards T-STATION 85H turbo molecular pump station molecular pump trolley XDD1 TS85W2001
The T-station85 is a compact, low-cost, removable turbomolecular pump trolley system that provides pumping speeds from 47 1s-1 to 84 1s-1 by seamlessly and systematically integrating the NEXT85H, a dry diaphragm or wet oil-sealed rotary vane pump, and an easy-to-use controller. The T-station85 comes with its own integrated controller for the molecular pump and vacuum gauge, enabling a single button start/stop system. If a vacuum gauge is fitted, the ability to control a gauge, the system breakthrough solenoid valve and delay the start of the turbomolecular pump until a certain point in time or until the system vacuum matches the gauge reading makes the T-station 85 ideal for general laboratory needs.
SKU: n/a
