10°C to 25°C 33L/Min 35L Capacity Recirculating Chiller


$5,990.00

Compare

Digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank, water pump and tubing for durability and rust-free operations. Water manifold included for immediate use.

Category:
 Model WAC-4
 Controller Digital micro-chip controlled with LCD screen and fluid level display
 Input power 480VAC 60Hz three-phase (3PH) 3.75kW
 Nominal cooling capacity 10366 kcal per hour
Nominal cooling capacity is according to:
Inlet chilled fluid temperature: 12°C
Outlet chilled fluid temperature: 7°C
Inlet cooling air temperature: 30°C
Outlet cooling air temperature: 35°C
 Compressor Make: Danfoss (UL Listed)
Power: 460V 3-60Hz 8A 3750 watts, LR 25A, thermally protected
Refrigerant: R407C (2,400g)
PS: 22.6 bar, TS max: 50°C, TS min: -35°C
Number of compressors installed: one
 Water pump Make: LX (CMF2-50T-A-W-G-BABE)
Power: 480V 60Hz 3-PH 550 watts 2.5/Y1.4A 3450 rpm IP55
Max liquid temperature: 70°C
Pumping speed: 33L per minute
Max pressure: 10 bar. H(max): 64m, H(n): 51m
 Reservoir capacity 35L
 Recommended coolant Distilled water
 Cooling fan Make: Weiguang (YWF4D-350S-102/34-G)
Power: 480V 60Hz 80/150 watts 0.27A 1640 rpm
Number of fans installed: two
Flow rate: 142,000 cu ft per hour
 Temperature accuracy +/- 2 °C
 Water inlet & outlet on chiller KF40 flange
 Water manifold Inlet: KF40 flange, outlet: 8mm quick connect with ball valve
 Unit/shipping weight 375 Lb / 485 Lb
 Unit/shipping dimensions 41 x 22 x 54″ / 50 x 25 x 61″ (DxWxH)
 Safety Over current, compressor delay start, water pump over load, built-in fuse, over-voltage and under-voltage, abnormal operations, phase protection
 Working environment Temperature range of chilled fluid: 5°C – 35°C. Temperature
difference of chilled fluid between inlet and outlet: 3°C – 8°C.
It is better to use the chiller while the ambient temperature is at or below 35°C
 Recommended to use with
these induction heaters
(result may vary on
different applications)
High frequency 10kW, 20kW, 30kW
Mid frequency 25kW, 35kW
Low frequency 25kW, 35kW
 CE compliant Yes